PheeNet WBIG-614GC is a high performance IEEE802.11g Wireless ADSL Router allows high-speed data communications over existing telephone wire. It provides interoperability with DSL access networks worldwide by high compatibility, and has built-in NAT routers, eliminating the need to purchase additional broadband routers. Also, it has 802.11g 54Mbps Wireless LAN built-in for user to do flexible application to service wired and wireless users. All advanced broadband router functions such as NAT, virtual server, DMZ, firewall functions and more are all included. By use of Ethernet interfaces, the WBIG-614GC provides simple interface connections: plug the RJ-45 cable into an Ethernet port and the ADSL cable in the ADSL wall socket - the WBIG-614GC enables even first time users to set up a DSL connection to the Internet in just minutes. BTW, web interface configuration also provide user more user friendly and quick help.
1.Compatible with ADSL & IEEE 802.11g 54Mbps / 802.11b 11Mbps
2.Supports wireless data encryption with 64/128-bit WEP, WPA for security
3.DHCP server & client
4.Support IP routing to share a single account with multiple workstations
5.Web browser configuration and management tool allows easy configuration via Ethernet or wireless connection
PPP over AAL5 (PPPoA): RFC-2364.
PPP over Ethernet (PPPoE): RFC-2516.
Classic IP over ATM (IPoA): RFC-1577
Multi-protocol Encapsulation over AAL5: RFC-1483 (LLC & VC Mux).
OAM F4/F5 loopback
ATM Adaptation Layer Type 5(ALL5)
Support AAL5 and UBR/CBR traffic shaping
Up to 8 PVCs(Virtual Circuits)
Advanced Function
Virtual DMZ host
Virtual Server Mapping
NAT/NAPT/Dynamic NAPT
DNS proxy
IGMP proxy
DHCP server/relay
SNTP
PPTP Pass-Through
DDNS
Bridging
Ethernet to ADSL self learning transparent bridging (IEEE 802.1d)
128 MAC address support
Firewall
User authentication for PPP
PAP (Password Authentication Protocol)
CHAP (Challenge Authentication Protocol)
Password-protected system configuration
Routing
Static IP routing
TCP/IP RIP V1/V2
Management
Web-based configuration
Firmware upgrade via FTP
ATM status(transmit/receive packet)
Hardware
Environment
Operating Temperature: 0 to 50° C
Storage Temperature: -20 to 70° C
Humidity: 10% ~ 90% non-condensing
