Proxim Tsunami.

0
Под заказ
Артикул:
#0001286
Proxim Tsunami.GX 200 Wireless 2xDS3 Capacity Ethernet Bridge. 5.8GHz ISM System, Low Band Terminal 301-58010-51LO

The Tsunami.GX 200 operates in the unlicensed 5.8 GHz frequency band and exceeds the capacity of two DS-3 leased line circuits. With throughput of 100 Mbps full-duplex IP and 2xT1/E1 interfaces, the Tsunami GX extends its reach over distances of 20 miles or 32 kilometers. Split box design enables flexibility in installation and support. Incorporates advanced diagnostics tools and standards-based management.

Note. Manufactory Shipping Container includes: Tsunami.GX 200 IDU (Indoor Unit); ISM Low Band  RF Unit; IDU Indoor Rack Management Kit; ACC-GX-RF-1 RF Unit Indoor Mounting Kit (includes 12” IDU to RFU TNC-to-TNC cable); Quick Instal Guide; CD-User Documentation

Fast, Cost-Effective Extension of IP Networks
Proxim's Tsunami.GX 200 is a full-duplex point-to-point wireless Ethernet bridge with an innovative split-box design. This latest generation of high-capacity wireless bridges is designed to reduce the expense of extending IP networks and to simplify installation. Secure wireless technology significantly reduces total cost of ownership and speeds deployment, while a split-box design adds installation flexibility. The Tsunami.GX 200 also provides best-in-class system performance with native IP interfaces by eliminating the overhead associated with DS3-to-Ethernet connections.

  • Perfect for data and data/voice network backhaul applications and for replacing, extending or backing up leased lines
  • Indoor-only installation facilitates quick maintenance and easier upgrades
  • Indoor/outdoor installation improves system gain and reduces total cost of ownership

Easily manage and trouble-shoot your wireless network
Tsunami.GX 200 bridges offer sophisticated, preventative management tools to simplify network maintenance and eliminate downtime. Advanced diagnostic tools identify and isolate potential issues before they impact the network.

  • Standards-based SNMP management and web-based GUI simplifies remote management and integrates easily into existing software platforms
  • Built-in spectrum analyzer and an alarm log facilitate RF planning and post-deployment tuning

Double the Speed of DS-3 with the Ease of Ethernet
Backed by more than 20 years of wireless design innovation, Proxim's Tsunami wireless bridge family easily and affordably enables network extension, redundancy and backhaul. Tsunami wireless bridges eliminate fiber installation costs and leased line fees to bring you the capacity of 2 DS-3 lines with the TCO of Ethernet.

  • High capacity for bandwidth-intensive applications such as PBX extension, data backhaul and critical link redundancy
  • No expensive recurring leased line costs
  • Superior system gain ensures consistent, high quality network operation

Deploy in days
Because Tsunami bridges operate in license-exempt ISM frequency bands, they can be deployed quickly - eliminating the long lead times associated with leasing lines or trenching new fiberoptic cable. This is especially useful in network redundancy and contingency planning.

  • Rapid device deployment and flexible re-deployment
  • ISPs maintain business continuity, even in severe conditions
  • Enterprises minimize costly business application downtime

Reliable and Secure
A wireless alternative to a wired network yields quality as well as flexibility. Proxim's Tsunami bridges offer the highest security and reliability available in networking today.

  • Over 99.999% reliable RF transmission
  • Meets or exceeds wired network security
  • Proprietary encryption methods ensure secure data transmission

Applications:

  • Enterprise building to building connectivity
  • Last Mile Access backhaul
  • Backhaul and inter-agency connections for Municipal Broadband Networks
  • Enterprise LAN and PBX extension
  • WAN connection redundancy
  • ISP remote POP
  • ISP direct customer connections using point-to-point
  • Multipoint backhaul at double DS-3 performance
  • Extension of an existing fiber network
Frequency Digital Capacity Channel Pairs FCC Emission Designator Treshold (BER=1X10-6) Output Power System Gain Distance (Miles/KM)
5725-5850 MHz 216 Mbps 1 32M5G1D  ≥ -73dBm ≥ 19 dBm ≥92 dB 20/32***

System

Configuration

Split-box: IDU, RF Unit

Modulation

DSSS; 16 QAM

Frequency Stability

±10 ppm

RF Attenuation Range*

≥15 dB

Maximum Receive Signal

-25 dBm error free; 0 dBm no damage

Error Floor

<10-11

Latency (T1)**, one-way

<300 µsec ±10%

Error Correction

Reed-Solomon

Security

12 character Link ID (48 bits)

Regulatory Compliance

FCC Part 15.247; IC RS210

FCC ID

HZB-US5358-GX1

Industry Canada ID

1856A-U5358GX1

Digital Interfaces

Main Data Channel

No waysides enabled

204 Mbps aggregate; 102 Mbps full duplex

T1/E1 wayside enabled

204 Mbps aggregate; 102 Mbps full duplex

2 T1 waysides enabled

196 Mbps aggregate; 98 Mbps full duplex

2 E1 waysides enabled

196 Mbps aggregate; 98 Mbps full duplex

10/100 Base T

RJ-45 modular jack; Auto-sense MDI/MDI-X

10/100 Base FX

SC-Type, multi-mode Fiber

Compliance

IEEE 802.3

Wayside Data Channels

T1/E1

DSX-1 (2 each) or CEPT-1 (2 each), software selectable RJ-48C modular jack

Compliance

Maximum Packet Size

1536 bytes

T1

ANSI-1987-T1, CCITT G.823

E1

G.703

Auxiliary Interfaces

Orderwire (DTMF)

RJ-11, 100 addresses

VF

8 pin modular jack, 4-wire, 0dBm @ 600 ohm, balanced

Aux Data (serial)

8 pin modular jack, EIA-561, ≤19.2kbps, selectable, DCE

FAULT AND CONFIGURATION MANAGEMENT

Network Management

SNMP v2c (MIB II, Proxim
enterprise MIBs), embedded
HTML server, Telnet, VT-100
terminal

Far End Management

Via NMS (embedded router,
gateway address, subnet
mask), front panel display

Interfaces

NMS 1

10/100BaseT, RJ-45, auto-sense

NMS 2

10/100BaseT, RJ-45, auto-sense

Configuration (serial)

EIA-574, 9600bps, 9-pin Sub-D, DTE

External Alarm Interface

Connector

9-pin Sub-D female

Outputs

2 Form C Relays (Major, Minor)

Inputs

2 TTL with internal pull-ups

Power/Environment

Input Voltage Range

-20 to -60 Vdc or +20 to +60 Vdc

Power Consumption

<70 Watts

Power Connector

3-pin terminal block

Operating Temperature

IDU

0°C to +50°C

RF Unit

-30°C to +55°C

Humidity

IDU

95%, non-condensing

RF Unit

100%, condensing

Altitude

up to 15,000 ft/5000 m

Wind Loading (RF unit)

up to 110 mph/96 kts

MTBF IDU

>100,000 Hours

MTBF RF Unit

>100,000 Hours

Physical Dimensions

IDU

RF Unit

Size (in/cm)

 

Size (in/cm) 17.2 X 10.9 X 1.72/43.6 X 27.6 X 4.4

14.1 X 10.9 X 1.72/35.8 X 27.6 X 4.4

Weight (lbs/kg)

 

6.5/2.9

12.0/5.4

Mechanical

RF Unit

 

Antenna Port (outdoor RF cable not provided)

Type-N female

IDU Port

TNC female

Cable to IDU

LMR-240 or equiv. <100m; LMR-400 or equiv. <200m; LMR-600 or equiv. <300m

Mounting

IDU

EIA rackmount, 19” or 23”, 1RU

RF Unit

EIA rackmount, 19”or 23”,  1RU, or outdoor pole mount bracket (optional)

SELECTABLE FREQUENCY CHANNEL PAIR

Channel Plan A

5745/5830 MHz

* Output power is specified at zero attenuation

** Does not include air latency of approximately 5.4 µsec/mile

*** RF Unit installed outdoors with 6ft. parabolic antenna, 99.995% one-way availability, average climate/terrain, no multipath reflection. Assumes FCC regulations for EIRP

[+]

[-]

up